1.Welded neck flanges

Manufactured to connect the piping system by butt welding and is best for high pressure applications.

The neck or shaft transfers stresses from the shaft base to the wall thickness when butt welding, this provides an important edge reinforcement.

The bore of the flange matches the bore of the tube, this reduces flow turbulence and corrosion.

2. Slip on flanges

It is welded from inside and outside in order to provide sufficient strength to prevent leakage.

3 Blind flanges

Blind flange is basically a flange that does not have a hub or a bored center it is used to lock and seal the piping system or vessel openings.

4 Socket Weld Flange

It is a threaded flange which is similar to sliding flanges in shape, but has a cavity.

1- Gate valve

Gate valves are widely used in all application types
Suitable for above-ground and underground installation.

2- Ball valves

It was given this name because its body is spherical.
A ball valve is a flow control device which uses a hollow, perforated and pivoting ball to control liquid flowing through it.
It is open when the ball’s hole is in line with the flow inlet and closed when it is pivoted 90-degrees by the valve handle, blocking the flow

3- Check valves

Check valves are one-way or nonreturn valves that open with fluid movement and pressure, and close to prevent backflow of the pressure.
It looks like a filter in Y shape.
It is used for steam and gases, as well as for liquids. It has less ability to hold impurities

Cast iron pipe fittings and supplies:

Coupling

Tee

Elbow 90°

Elbow 45°

Covers

Plugs

Fittings Union

Piping Reducer

Nipple

Bushing

Sokolet

Weldolets

Threadolet